Product Data Sheet    

ATP1600WRP


Adaptive Technology PIR Wall Mount Sensor
The Hubbell Adaptive Technology wall mount sensors offering includes dual technology and passive infrared sensors with a 1600 square foot coverage pattern as well as passive infrared sensors for high bay applications in warehouse aisle ways. The wall mount sensors include a swivel mounting bracket that allows the sensor to be ceiling or wall mounted. This makes them suitable for applications with ceiling heights over 12 feet. The ceiling bracket is also designed to accept surface raceway for hard ceiling applications. Models with “RP” suffix include an isolated relay and photocell. A CU series control unit is required for use with ATD and ATP series wall mount sensors.

Hubbell Wiring Device-Kellems Product Specifications
 Product  Indoor Sensor
 Application  Wall Mount
 Sensing Technology  Passive Infrared
 Coverage Area  1600 Sq. Ft.
 Adaptive  Yes
 Color  
 Photocell & Isolated Relay  Yes
 Power Requirements  24V DC Nominal, 33mA from Hubbell CU Series Control Unit
 Isolated Relay  Normally open and normally closed terminals available
 Lens Material  Polyethylene
 Dimensions  6"H x 2"W x 1.5"D
 Housing Material  Flame retardant UL 94 V-0 ABS
 Operating Temperature  32° F to 104° F (0° C to 40° C) with rate of change not exceeding 20° F (11° C) per hour
 Operating Humidity  0% to 95% noncondensing relative humidity
 Storage Temperature  -20° F to 150° F (-29° C to 65° C)
 Storage Humidity  0% to 95% noncondensing relative humidity
 Time Delay  Test (8 seconds), Adaptive 8 to 40 minutes
 Ambient Light  1 to 1,000 foot candles
 Sensitivity  Adaptive 0 to 100%
 Passive Infrared Sensing Indicator  Red LED
 Mounting Height  8 to 12 ft.










 

Hubbell Wiring Device-Kellems